Trojan has led the development of water treatment solutions using environmentally friendly ultraviolet (UV) light. Trojan has the largest installed base of UV systems in operation on the planet, and many of their innovations define the industry standards for safeguarding your water from the damaging effects of microbial and chemical contamination. Install a Trojan UV Max disinfection system and you no longer have to be concerned about waterborne pathogenic organisms causing illness. Trojav UV systems kill bacteria, viruses, and other pathogens by preventing them from reproducing.
What UV light is right for me?
Benefits
- Does not effect Taste, Color and Odor of the water
- Capable of destorying 99.9% of harmful microorganisms including: E. coli, Cryptosporidium and Giardia
- 20 GPM peak flow
- Easy to maintain
- Cost-effective, uses the equivalent of a 140 Watt light bulb
- UV Lamp now lasts 2 years! Twice as long as any other UV system.
- Natural and safe disinfection without the use of harmful chemicals
- No disinfection by-products
- Fast acting
- Effective against a broader range of organisms than chlorine
- Best warranty on the market
Product Features
- UV Intensity Monitor w/ CoolTouch Kit
- Lamp Age Display and Alert
- Digital diagnostic display
- Alarm reset button
- Electropolished exterior
- Dynamic flow restrictor
- NSF Certification
Pro Series Advantage Intuitive Interface
How does UV disinfection work?
UV light penetrates and permanently alters the DNA of the microorganisms in a process called thymine dimerization. The microorganisms are inactivated and rendered unable to reproduce or infect. Analogy: a broken zipper.
FAQs
Q. What does the Pro model have that the Max or Plus models do not?
When you purchase a Pro model UV system, you are getting the same great UV disinfection the normal model has, but with added peace of mind and security. All Plus models include the lamp-age display and alarm system w/reset button. They also include a UV intensity montior, which is used to keep a close eye on the amount of UV you are getting into your water.
The UV Intensity Montior is required in some states when installing a UV (contact your water company or building inspector) and will ensure that you are getting proper disinfection. If the UV intensity begins to drop, then you know its time to clean the sleeve or replace the lamp. Another added safety feature is NSF certification that this UV system will guarantee you proper UV disinfection by use of a flow restrictor preventing you from pushing too much water through the system. This NSF certification will ensure the required 40m/J level of UV for complete disinfection of your water. CoolTouch may be required for your installation.
Q. What is a CoolTouch and why would I need it?
A CoolTouch system is needed for all UV systems that have UV intensity montiors where water is not in use 24/7. The CoolTouch will move water through the UV chamber to reduce the tempurature of the water. If the water is allowed to get too warm, the UV intensity monitor will show that the UV intensity is too low and set off an alarm. This CoolTouch helps to prevent that alarm from going off and also keeps the water cool inside the chamber. Since the UV lamp is always on, if water is not in use all the time, adding this is a requirement.
Q. Is there a lot of maintenance required with a UV system?
A. All you have to do is priodically clean the lamp sleeve and replace your lamp once every 2 years - simple processes you can complete in minutes. For ease of handling the lamp and protective quartz sleeve are designed as one component, but can be replaced seperatly. No tools are required for maintenance
Q. What type of warranty does the Trojan UV Max Systems come with?
A. The Trojan UV Max comes with a full five year warranty against manufacturer's defects on the power supply and all electrical components; a ten year guarantee on the water chamber; and a one year warranty on lamps and UV intensity monitors.
Q. Why is it recommend to pretreat the water before installing a Trojan UV Max System?
A. A 5-micron sediment pre-filter(link) is recommend to remove dirt and debris. The reason for this pretreatment is the quality of the water can not only affect the dosage of UV disinfection the system provides, it may also cause premature "sleeve fouling" which will require the sleeve to be cleaned more often, and may also damage the UV sleeve.
Q. What is a CoolTouch Kit?
A. The Cool Touch kit is a feature that will release hot water from the UV chamber before the water inside the chamber reaches a temperature in which the UV Intensity Alarm is tripped. This Kit is required for models that include a UV Intensity Monitor.
Q. What makes the Trojan UV Max light more effective than other on the market?
A. The UV light is generated from a low-pressure, high-output lamp new to the residential and commerical UV market. These lamps provide a higher intensity of UV light making it possible to treat a given volume of water with smaller, more efficient units.
Trojan UV Max: Product Specifications
- Control Module (black) with Audible/Visual Lamp Failure Alarm
- Safety cap
- 304 Stainless Steel Water Chamber
- 1" Inlet/Outlet
- Standard 110 Electrical Outlet
- 140 Watt UV Lamp Power
- Max. Power Consumption 160 Watts
- Dimensions: Chamber 31" x 4"
- Dimensions: Power Supply 13" x 6.5" x 2 1/2"
Operating Parameters
- Iron <0.3 ppm
- Hardness <120 ppm (7 GPG)
- UV Transmittance >75%
- Max Working Pressure 125 PSI
