Tannins can cause yellow water and yellow staining on fabrics and fixtures. Tannins measuring 0.5 PPM or higher may cause staining and/or interference with various water treatment processes.
- High capacity resin
- Easy-to-program metered electronic head
- Standard bypass included
- Chrome tank jacket standard
- Reduces tannins up to 10 PPM
- 90-day customer satisfaction guarantee
- Limited lifetime manufacturer's warranty on tanks and parts (5 year on electronic head)
- 18"x 33" round brine tank that holds 375 lbs. of salt
Your water must have <2.0ppm Iron. If you have more then that you will need to employ pretreatment for the iron before hand by purchasing one of our Pelican Whole House Iron Filter Systems.
|
There Are 3 Important Steps To Softening
- Backwashing Phase: This removes dirt from the mineral tank and is part of the regeneration process
- Regeneration Phase: The mineral tank is recharged with sodium from the brine tank solution and displaces calcium and magnesium, which is then washed down the drain during the Backwashing Phase.
- Rinse Phase: The mineral tank is rinsed with fresh water and loads the brine tank so that it is ready for the next cycle.
|
As water passes through the mineral tank, the positively charged calcium and magnesium ions are lost to negatively charged plastic beads. The brine tank holds a solution of water and salt that will flush the mineral tank and replace the calcium and magnesium ions with sodium. Recharging cycles are controlled by the meter on the top of the tank (normally once every 7 days).
Disclaimer: The information on this website has not been reviewed by the FDA. Products offered for sale herein are not intended to treat, cure or prevent any disease or health condition. No medical claims are being made or implied. |
 |
| National Sanitation Foundation (NSF) Certification |
back to top |
|
 |
Video Page
We invite you to watch the videos below to learn more about your water and how you can benefit from installing a Premium Pelican System in your own home. Pelican Water is the leader in premium whole house water filtration and salt-free systems. In this day and age it now more important than ever to filter your water, protect your pipes and appliances from the negative effects of hard water. |
|
| Is your water Safe? |
Learn about the problems we are facing today with our limited drinking water supply. Also learn about the Pelican solution for your family. Learn how chlorine and chloramines are absorbed through your skin and into your foods, including how to remove them from your water. Water is one of our most valuable resources and its time to start treating that way.
|
|
|
| Salt Water Softeners and Reverse Osmosis |
Learn about the affects of salt-based water softeners and how they work. Also learn about Reverse Osmosis (RO) systems and how they work. Many people who have a salt or potassium-based water softener do not realize the damaging effects it can have on our planet and our bodies over a period of time.
|
|
|
| Safeguarding your water |
Learn about the benefits and advantages of owning the Pelican Combo Series. The EPA says it is up to you to filter your water in your home. Adding a filter to your home is the first line of defense against harmful chemicals and byproducts. The Pelican Natursoft system offers a green alternative to water softening that will protect your biggest investment: your home, from scale and the damaging effects of hard water.
|
|
PT3 |
System Height: |
62.5" |
Tank Width: |
10" |
Max. Flow Rate: |
10 GPM |
Connection Size: |
1" |
Operating Pressure: |
25-100 PSI |
Operating Temperatures: |
36-120 F |
pH Range: |
6-7 |
|
PT6 |
System Height: |
62.5" |
Tank Width: |
13" |
Max. Flow Rate: |
14 GPM |
Connection Size: |
1" |
Operating Pressure: |
25-100 PSI |
Operating Temperatures: |
36-120 F |
pH Range: |
6-7 |
|
 |
- Pelican Tannin Reduction filter system
- Bypass valve and fittings (1”)
- Brine tank with float and drain line
- Installation guide
|
Electronic Head:
Manufacturer's 5 year warranty against defects on Solid-State Electronic Head.
Pelican Limited Lifetime Warranty on all filter housings, tanks, in/out heads, and the bypass valves against manufacturer's defects.
Pelican Water (“Pelican”) warrants to the end user (“customer”) that its tanks, valves, in/out heads, bypass’s, fittings and housings (“Covered Items”) will be free from defects in material and workmanship under normal use and service for the life of the system. No warranty is made with respect to defects or damaged due to neglect, misuse, alterations, accident, misapplication, physical damage, or damaged caused by fire, acts of God, or freezing.
|
| Q. If I am on a sodium-restricted diet or suffer from hypertension is there a substitute for salt that I can add to the Pelican Water Softeners? |
Yes, You can use potassium chloride instead of salt. The benefit is that you will be adding potassium to your water instead of sodium. Potassium chloride is a more expensive alternative but well worth the cost when weighing the benefits.
|
| Q. What type of salt should I use in the Pelican Water Softeners? |
It is recommended that coarse salt be used, which most grocery stores carry in bulk. Block salt should never be used.
|
| Q. Will I notice a pressure loss after installing a Pelican Water Softener? |
With all brands of water softeners there will be a pressure drop. The Pelican Advantage Series Water Softeners are of the highest quality available on the market therefore the pressure drop will be very low compared to most other brands..
|
| Q. Can the Pelican Water Softeners drain line be drained into my septic system and what type of affect will it have on the drain field? |
According to the Water Quality Association Technical Papers concerning septic tanks, etc.: Concerns about salt and soil absorption rates were dispelled. The increased sodium content in the tanks discharge was shown to have no detrimental effect on the soil's ability to absorb water in a normal drain field. Interestingly, certain soil conditions benefited from it. Additionally, when the softener's calcium-rich regeneration backwash emptied into the septic system, the discharge could actually improve the soils percolation the conclusion drawn from these tests is that the softened water is not harmful to a normally operating septic system or drain field.
|
| Q. Can the drain line be located above the softener? |
As long as the water pressure at the softener is not less than 40 PSI and the run of the drain line does not exceed 15', your discharge line may be elevated up to 4' above the system. For each additional 10 PSI of water supply the line can be elevated an additional 2'.
|
| Q. Is softened water recommended for use on my plants or lawn? |
If you are using sodium chloride to regenerate you resin, overtime, softened water could be harmful to your plants and other vegetation. It is recommended that the outside faucets be bypassed from the softener.
|
| Q. How much salt will I have to add to the Pelican Water Softener? |
A typical home with a family of 4 with 2.5 bathrooms and a hardness of 10 will require a 32,000 grains softener that will regenerate every 11 days. The softener uses about 9 lbs of salt per regeneration, so if your brine tank is full (400lbs) from the start, you will not add salt for about 10 months.
|
| Q. Do I need to know what size my plumbing fittings are before I order the Pelican Water Softener? |
No, the Pelican Water Softener System comes complete with ¾" and 1" copper and CPVC plumbing fittings and also a 50' drain line for your convenience.
|
If you have any additional questions regarding this product, please click here contact us.
|
